How It Works?
How Does Smartwhip Work?
Smartwhip solves the issue of having no precise control over the amount of pressure (N2O) you apply to your Smartwhip cream dispenser. You easily connect the Smartwhip N2O set to the smartwhip cream dispenser and have a full pressure and portion control.
1. Screw the pressure regulator on
2. Pour contents into cream dispenser
3. Connect pressure regulator hose to cream dispenser
Connect the pressure regulator hose to the cream dispenser via the push-pull connector, making sure that the flow switch is OFF. You will hear a click sound when it is connected.
4. Open gas flow switch
When the system is fully connected, open the flow switch at the end of the hose, by moving the lever in the direction of ON.
5. Set gas pressure according to the Smartwhip pressure table
Set the barometer to your desired working pressure by turning the barometer knob in a clockwise motion. You will hear a slight hissing sound as the gas flows into the cream dispenser. Check the Smartwhip pressure table for a rough indication of how much pressure to use.
6. Close the flow switch
When the hissing sound has stopped, close the flow switch in the OFF direction, ensuring it is at a 90-degree junction with the pressure regulator head.
7. Disconnect the pressure regulator hose from the cream dispenser
Disconnect the pressure regulator hose from the cream dispenser by squeezing the connector body and removing the cream dispenser.
8. Shake the cream dispenser
Shake the cream dispenser to evenly distribute the gas, then place your decorating tip of choice onto the cream dispenser and release the contents.